hour meter for motorcycle marine atv honda ktm yamaha kawasaki suzuki orange
Brand New Inductive Hour Meter for Marine,ATV,Motorcycle,Dirt,Ski.
Track the service life of your vehicle-oil changes, valve, adjustments, spark plugs, etc
Easy installation,no wiring necessary,or attach with enclosed hardware.
No battery required-connecys to spark plug wire.
Works on any gasoline engine.
Records and displays to 9,999.9 hours.stand-by time up to over 20,000 hours.
Hour glass symbol appears and flashes on/off to indicate counting time.
Automatic roll over
Resolution 0.1 hour.
100% epoxy encapsulated casing resists water,shock,stand fire of 85 celsius degree
All motorcycle models(with a spark plug really should work)
meter ,pick-up wire,two screws
Tools Required: 2.5mm socket to remove shroud,wire cutters
Hour meter installation method
1.Wrap the included pick-up wire around the spark plug wire five times.Start wrapping the pick-up wire about 4cm from the end of spark plug boot .
Use the included zip tie to secure the pock -up wire wrapping as shown in the photo right.
2.Before continuing the installation ,insert the pick -up wire into the rear of the meter.Start the motor to make sure the meter is picking up the ignition signal .
if it is,this will activate the timer on the meter and the icon on the left of the LCD will flash .You ‘ll have to wait at least 6 minutes for the timer to increase the timer display (1/10th of an hour).
if it is not picking up the ignition signal ,slide the pick-up wrap closer to the spark plug boot.
3.if the meter is successfully picking up the spark signal ,run and zip tie the pick-up along one of the throttle cables.
make sure the pick-up wire can npt make contact with the engine.Also,make sure you leave enough slack (about 8cm) so removing the spark plug wire is possible .
Keep in mind the general location of final mounting location on the frame spare.
a.Drilling into your frame with 2.5mm socket it to the frame coming with two pick -up screws.
b.Using padded double -sided tape on the backside of the meter and secured it to the frame spar with zip ties.
(Not including in the pack)
That’s all there is to the installation .
now you’re set to accurately track your mainteance
Don’t forget to record the metered time when performing maintenance.